Yealink SIP-T48S, User Manual, Page: 122 / 159

Yealink T4 Series IP Phones User Guide
118
LED Status
Icon
Description
T48S/T48G T46S/T46G
Solid red Monitored line is busy or in a call.
Slow-flashing red
Monitored line places a call on hold.
A call is parked to the monitored line.
Off Monitored line fails to register or does not exist.
Picking up a Remote Call by BLF List Key
When a monitored line receives an incoming call, you can pick up the incoming call by pressing the BLF List key. For
example, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply by
pressing the flashing BLF List key.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Pressing the BLF List key to pick up the call for the monitored line directly.
Transferring a Call by BLF List Key
When there is already an active call on the IP phone, you can transfer the active call to the monitored user by pressing
the BLF List key.
The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode via
Dsskey feature configured by your system administrator.
Topics
Performing a Blind Transfer
Performing a Semi-attended/Attended Transfer
Performing a Blind Transfer
Before You Begin
Check with your system administrator to make sure that the Transfer Mode via Dsskey is set to Blind Transfer .
Procedure
1. During a call, press the BLF List key of the monitored line which you want to transfer this call to.
Performing a Semi-attended/Attended Transfer
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer .
Procedure
1. During a call, press the BLF List key of the monitored line which you want to transfer this call to. The phone will dial
out the number of the monitored line.