User Guide for the SIP-T46S IP Phone
168
soft key. Before picking up an incoming call, ensure that the directed call pickup code has been
configured in advance.
To pick up an incoming call using the BLF key or the DPickup soft key:
1.
Press the BLF key or the
DPickup
soft key.
The incoming call of the monitored user is answered on the IP phone.
Note
Parking a Call/Retrieving a Parked Call to the Monitored User
You can press the desired BLF key to park a call or retrieve a parked call directly in FAC mode. It
should be pre-configured by your system administrator.
To park a call in FAC mode:
1.
During a call, press the
Park
soft key (You may need to press the
More
soft key to see the
Park
soft key).
2.
Press the desired BLF key to park the call to the monitored user.
To retrieve a parked call in FAC mode:
1.
Press the
Retrieve
soft key on the dialing screen.
2.
Press the desired BLF key to retrieve a call that is parked to the monitored user.
Note
BLF List
You can use the BLF List feature to monitor a list of users defined by your system administrator.
For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,
[email protected]) including a list of user1, user2 on the server. The BLF List keys on the IP
phone can present the status of user1 and user2. The key LEDs illuminate either flashing or solid
depending on the status of those users. For more BLF List key LED indicators, refer to
on page
You can use the BLF List keys in the following ways:
When the monitored user is idle, press the BLF list key to dial out the phone number.
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by pressing the BLF List key. The phone handles the active call differently
depending on the configuration of transfer mode via Dsskey with the BLF list key. For more
If the call pickup code is not configured, the phone will place a call to the monitored user
instead of picking up an incoming call of the monitored user when you press the BLF key or the
DPickup
soft key.
Make sure that the call park code/park retrieve code is configured via web user interface at the
path:
Feature
->
Call Pickup
. For more information, refer to
on page
Summary of Contents for SIP-T46S
Page 1: ...aji...
Page 26: ...User Guide for the SIP T46S IP Phone 16...
Page 230: ...User Guide for the SIP T46S IP Phone 220...
Page 235: ...Appendix 225 Appendix B Menu Structure...
