Yealink SIP-T41S User Manual Download Page 84

Page: 84 / 253

User Guide for T4 Series IP Phones

To adjust the display order of the enabled lists, select the desired list and then click
or .

Click

Confirm

Procedure (via phone user interface):

Press

Directory

(

Dir

) when the phone is idle.

The LCD screen displays the enabled list(s) in the directory

If there is only one list in the directory, press

Directory

(

Dir

) to enter this list directly.

Note

Local Directory

You can store up to 1000 contacts and 48 groups in your phone’s local directory, allowing you

If the remote phone book and LDAP are not configured in advance, you cannot view remote
phone book and LDAP lists in the phone user interface. For more information on remote phone
book, refer to

Remote Phone Book

. For more information on LDAP, contact your system

administrator.

Downloaded from

ManualsNet.com

search engine

Summary of Contents for SIP-T41S






























































































































































































































































Search results

Summary of Contents for SIP-T41S

Reviews:

Yealink SIP-T41S, User Manual, Page: 84 / 253

Search results

Summary of Contents for SIP-T41S

Reviews: