Yealink SIP-T40P User Manual Download | Manualshive

Page: 2 / 188

background image

Copyright

Copyright © 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD

Copyright © 2017 Yealink(Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,
photocopying, recording, or otherwise, for any purpose, without the express written permission of
Yealink(Xiamen) Network Technology CO., LTD. Under the law, reproducing includes translating into
another language or format.

When this publication is made available on media, Yealink(Xiamen) Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private use
but not for redistribution. No parts of this publication may be subject to alteration, modification or
commercial use. Yealink(Xiamen) Network Technology CO., LTD. will not be liable for any damages arising
from use of an illegally modified or altered publication.

Warranty

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS
GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink(Xiamen) Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential damages in
connection with the furnishing, performance, or use of this guide.

Declaration of Conformity

Hereby, Yealink(Xiamen) Network Technology CO

.,

LTD. declares that this phone is in conformity with

the essential requirements and other relevant provisions of the CE, FCC.

You can find the CE and FCC information from the label on the back of the IP phone.

Statements of compliance can be obtained by contacting [email protected].

CE Mark Warning

This device is marked with the CE mark in compliance with EC Directives 2014/35/EU and 2014/30/EU.

Part 15 FCC Rules

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

«
1
2
3
4
...
»

Summary of Contents for SIP-T40P





























































































































































































Reviews:

No comments

Related manuals for SIP-T40P

Brand: Ecom Instruments Pages: 64

Brand: Dinstar Pages: 8

Brand: E-TEN Pages: 30

Brand: Infinix Pages: 11

Brand: i-mobile Pages: 99

Brand: Netway Pages: 68

Brand: iDROID Pages: 21

Brand: Verykool Pages: 30

Brand: Matrix Pages: 1046

Brand: OneTouch Pages: 40

SPRINT SPH-L600

Brand: Samsung Pages: 159

MyShot II SCH-R460 Series

Brand: Samsung Pages: 153

N105 - SGH Cell Phone

Brand: Samsung Pages: 130

Brand: Samsung Pages: 167

Sprint Power Vision A900

Brand: Samsung Pages: 272

CLEARSOUND ClearText

Brand: Geemarc Pages: 31

Brand: KATA Pages: 45

Brand: Asus Pages: 83

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands