Yealink SIP-T40P User Manual Download Page 17

Page: 17 / 188

Overview

Icon indicator

(associated with call history)

Icons

Description

Missed Calls

Placed Calls

Received Calls

Forwarded Calls

Icon indicator

(associated with contact)

Icons

Description

The contact icon

LED Instructions

Power Indicator LED

LED Status

Description

Solid red

The phone is initializing.

Fast-flashing red (300ms)

The phone is ringing.

Slow-flashing red (1s)

The phone receives a voice mail or text message.

Off

The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.

Line key LED

LED Status

Description

Solid green

The line is seized.
The line is in conversation.

Fast-flashing green

The line receives an incoming call.

Slow-flashing green

The call is placed on hold.

Off

The line is inactive.

Summary of Contents for SIP-T40P





























































































































































































Search results

Summary of Contents for SIP-T40P

Reviews:

Related manuals for SIP-T40P

Brands by name

Popular brands

Yealink SIP-T40P, User Manual

Search results

Summary of Contents for SIP-T40P

Reviews:

Related manuals for SIP-T40P

Brands by name

Popular brands