Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
38
Language packs
Ring tones
Contact files
After connected to the power and network, the IP phone begins the initializing process
by cycling through the following steps:
1.
The power indicator LED illuminates solid red.
2.
The message “Welcome Initializing… please wait” appears on the LCD screen
when the IP phone starts up.
If you are using CP860 IP phones, and the phones are first powered on or the phone
settings are reset to factory defaults, the setup wizard will appear on the LCD
screen after startup. If not, go to the next step.
Note
3.
The main LCD screen displays the following:
Time and date
Soft key labels
4.
Press the OK/√ key or tap Menu->Status to check the IP phone status, the LCD
screen displays the valid IP address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is
ready for use.
For more information on the setup wizard, refer to
Summary of Contents for SIP-T2 Series
