Yealink SIP-T2 Series, Administrator'S Manual

Page: 58 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
36
Lock together. You are advised to attach the camera to the external monitor whose
back is straight.
3) Connect the other end of the USB3.0 cable to the IP phone.
4) Connect one end of the HDMI cable to the HDMI port on the phone, and connect
the other end to the HDMI port on the external monitor.
Note
The following tips you need to know when mounting the camera to the external monitor:
a) Be aware of attaching the camera to the external monitor from the back of the
monitor and make sure the camera lens is on the same side with the monitor screen.
b) Confirm that the camera is vertical and not askew when using Dual Lock to attach
the camera to the external monitor otherwise the near-site video image will be
crooked.
c) Make sure that you firstly press the back of the camera when you rotate the camera.
It can reduce the risk of falling off.
d) Be aware that the stick area of two sides of Dual Lock (on the camera and external
monitor) is as large as possible.
e) Ensure that you insert forcibly until the camera indicator LED is solid green; and the
embossing on the camera does not need to insert into the groove on the IP phone if
you want to insert the camera back to the IP phone and do not torn the 3M Dual
Lock.
The initialization process of the IP phone is responsible for network connectivity and
operation of the IP phone in your local network.
Once you connect your IP phone to the network and to an electrical supply, the IP phone
begins its initialization process.
During the initialization process, the following events take place:
The Extended Display Accessories ED10 which is not included with your IP phone is
required for connecting the external monitor. Contact your reseller to purchase it
separately. For more information, refer to
Yealink Extended Display Accessories Quick
Installation Guide for SIP VP-T49G
.