Configuring Basic Features
131
The LCD screen displays the device name and MAC address. The MAC address
cannot be edited.
5.
Enter the desired name in the Device Name field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
Wi-Fi feature enables users to connect their phones to the organization’s wireless
network. The wireless network is more convenient and cost-effective than wired network.
Wi-Fi feature is only applicable to SIP VP-T49G and SIP-T48G IP phones.
When the Wi-Fi feature is enabled, the IP phone will automatically scan the available
wireless networks. All the available wireless networks will display in scanning list on the
touch screen. You can store up to 5 frequently-used wireless networks on your phone
and specify the priority for them.
Yealink SIP VP-T49G IP phones support connecting to 2.4G/5G wireless network. The
wireless channels in the 2.4 GHz/5 GHz band vary from country to country, so you may
have problems connecting your phone to the wireless network in your area. You can
configure the country wireless channel for your phone depending on the desired area
as required.
Yealink IP phones support VLAN in the wireless network. For more information, refer to
Configuring VLAN Feature in the Wireless Network
Note
The following advices you need to know when using the IP phones in the wireless
network:
a)
Check whether the wireless network is normal when the account registers failed or
sometimes there is no sound during an active call.
b)
Ensure that the bandwidth of your wireless network is able to provide stable and
real-time data transmission otherwise the quality of video calls may be affected.
We recommend you to use the wired network for video calls.
c)
For SIP VP-T49G IP phones, no matter which network (wired network or wireless
network) you are using, please properly consider whether to configure the uplink
and downlink bandwidths according to your bandwidth capacity.
d)
We recommend you do not use the unstable router product in your home/office
environment.
e)
We recommend you to set the password for the wireless network so as to ensure
the network resource will not be occupied by the unknown user.
To use Wi-Fi feature on SIP-T48G IP phones, make sure the Wi-Fi USB dongle is
properly connected to the USB port on the back of the phone.
When you connect the Ethernet cable, you can enable the Wi-Fi feature. But you have to
disable the Wi-Fi feature if you want to use the wired network.
Summary of Contents for SIP-T2 Series
