Yealink SIP-T19 E2 T4 Series, User Manual

Page: 131 / 152

Advanced Phone Features
121
2. Follow the voice prompt to listen to your voice mails.
Note
To view the voice mail via phone user interface:
1. Press Menu->Message->Voice Mail->View Voice Mail.
2. The LCD screen displays the amount of new and old voice mails.
3. Press the Connect soft key to listen to voice mails.
The SIP-T19(P) E2 IP phone supports MWI when receiving a new voice message. If
someone leaves you a voice mail, you will receive a message waiting indicator. MWI
will be indicated in three ways: a warning tone, an indicator message (including a
voice mail icon) on the LCD screen, and the power indicator LED slow flashes yellow.
This will be cleared when you retrieve all voice mails or delete them.
The MWI service is unsolicited for some servers, so the SIP-T19(P) E2 IP phone only
handles the MWI messages sent from the server. But for other servers, the MWI service
is solicited, so the SIP-T19(P) E2 IP phone must enable subscription for MWI.
Note
The MWI subscription parameters you need to know:
Options Description
Subscribe for MWI Enable or disable a subscription for MWI service.
MWI Subscription Period
Period of MWI subscription. The IP phone sends a
refresh SUBSCRIBE request before initial SUBSCRIBE
expiration.
Subscribe MWI To Voice
Mail Enable or disable a subscription to the voice mail
number for MWI service.
MWI service is not available on all servers. Contact your system administrator for more
information.
Before listening to voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will go out.