Basic Call Features
91
To retrieve a parked call in Transfer mode:
1.
Do one of the following:
-
If the park retrieval number is not configured, you need to enter the park
retrieval number (e.g., *11).
Press , or the Send soft key.
-
If the park retrieval number is configured, press the Retrieve soft key on the
dialing screen.
The phone will retrieve the parked call from the directional parking lot where the
park retrieval number directed to.
You can use call pickup to answer someone else’s incoming call on your phone. The
SIP-T19(P) E2 IP phone supports directed call pickup and group call pickup. Directed call
pickup is used for picking up a call that is ringing at a target phone number. Group call
pickup is used for picking up a call that is ringing at any phone number in a certain
group. The pickup group should be predefined, contact your system administrator for
more information.
You can pick up an incoming call by using the DPickup/GPickup soft key. To use call
pickup, you need to configure the call pickup code beforehand on a global or per-line
basis via web user interface.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1.
Click on Features->Call Pickup.
2.
Select Enabled from the pull-down list of Directed Call Pickup.
If there are many incoming calls at the same time, pressing the GPickup soft key on the
phone will pick up the call that rings first.
Summary of Contents for SIP-T19 E2 T4 Series
