Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
714
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.redial_tone
Integer within 6 digits
Blank
Description:
Configure a number which you enter on the dialing screen, the IP phone will replay the dial
tone.
Example
:
features.redial_tone = 123
The IP phone will continue to play the dial tone after inputting “123” on the dialing screen.
Web User Interface:
Features->Audio->Redial Tone
Phone User Interface:
None
To configure redial tone via web user interface:
1.
Click on
Features
->
Audio
.
2.
Enter the desired value in the
Redial Tone
field.
3.
Click
Confirm
to accept the change.
Ring Tones
Ring tones are used to indicate incoming calls acoustically. Users can select a built-in system
ring tone or a custom ring tone for the phone system or specify line registration. To set the
custom ring tones, you need to upload the custom ring tones to the IP phone in advance.
Summary of Contents for SIP-T19 E2 T4 Series
