Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 559 / 981

Configuring Advanced Features
537
Visual Alert and Audio Alert for BLF Pickup
Visual and audio alert for BLF pickup allow the supervisor’s phone to play a specific ring tone
and display a visual prompt (for example, “6001<-6002”, 6001 is the monitored extension which
receives an incoming call from 6002) when the monitored user receives an incoming call. You
can configure the display method of the call party information.
In addition to the BLF DSS key, visual alert for BLF pickup feature enables the supervisor to pick
up the monitored user’s incoming call by pressing the
Pick Up
soft key. You may need to
configure the directed call pickup code in advance. For more information on how to configure
the directed call pickup code for the
DPickup
soft key, refer to Directed Call Pickup on page
434 .
Ring Type for BLF Pickup
Ring type for BLF pickup allows you to configure a different ring tone to distinguish the
incoming call on your phone from that on the monitored phone. It helps clearly notify you of
the ringing state of a monitored phone. To use this feature, you need to enable audio alert for
BLF pickup feature in advance.
Procedure
Configuration changes can be performed using the following methods.
Central
Provisioning
(Configuration
File)
<y0000000000xx>.c
fg
Specify whether to use visual alert and
audio alert for BLF pickup.
Parameters:
features.pickup.blf_visual_enable
features.pickup.blf_audio_enable
Configure ring type for BLF pickup.
Parameter:
features.blf.ring_type
Configure the display method of the call
party information.
Parameter:
features.pickup_display.method
Web User Interface
Specify whether to use visual alert and
audio alert for BLF pickup.
Configure ring type for BLF pickup.
Navigate to
:
http://<phoneIPAddress>/servlet?p=featur
es-callpickup&q=load