710-0184-300
Introduction
Integrating a Yealink Cordless IP Phone with Ooma
Office is quick, and can be accomplished in just a few
simple steps.
By following the instructions below to provision the
phone, you can put it into service immediately without
any manual configuration.
Package Contents
If the handset displays Not registered, press and
hold the pairing button on the base unit until the
LED on the base begins to flash.
Press the Reg softkey on the handset. The handset
should pair with the base unit and synchronize its
configuration.
Once you see the correct date/time display on the
handset, press the Speaker button. If you hear
dialtone, your handset is ready to make and receive
phone calls.
Step 3
Pair Handset
Step 2
Connect Base Unit to Network
Follow the instructions in the phone’s user manual to:
•
Plug the base unit into power
•
Connect the base unit to your Internet connection
•
Insert the battery into the handset
•
Connect the charging cradle to power
•
Charge the handset
Yealink Cordless IP Phone
Quick Installation Guide
Step 1
Register Phone Online
W60B Base Unit
Ethernet Cable
Battery
W56H Handset
Charging Cradle
Power Adapter
To get started, you must first
add the Yealink Cordless IP Phone
to your Ooma Office account.
You can do this by visiting
the following URL
and following the
steps on the screen:
http://office.ooma.com/add_ip_phone
With
Power
Adapter
Ooma-Insert-Yealink-Cordless Phone-ENG-FR Aug2018-R8.indd 1
8/3/18 5:30 PM
