Yealink One Talk CP960 User Manual Download

Page: 247 / 255

Using the CP Wireless Expansion Mic CPW90

247



Standby Time (estimated standby time)



Work Time(estimated working time)

To view the CPW90 information on the IP phone:

Tap

Settings

from Home screen.

Tap

Wireless

Microphone

from

Basic

block.

Tap

Detail

from the desired microphone block.

Finding the CPW90

You can find the CPW90 which has registered with the IP phone.

To find the registered CPW90:

Tap

Settings

from Home screen.

Tap

Wireless

Microphone

from

Basic

block.

Tap

Find

from the desired microphone block.

The mute indicator LED on the registered CPW90 flashes red and green alternately.

Charging the CPW90

To charge the CPW90:

Put the CPW90 on the charging cradle.

Summary of Contents for One Talk CP960
































































































































































































































































Search results

Summary of Contents for One Talk CP960

Reviews:

Related manuals for One Talk CP960

Brands by name

Popular brands

Yealink One Talk CP960, User Manual

Search results

Summary of Contents for One Talk CP960

Reviews:

Related manuals for One Talk CP960

Brands by name

Popular brands