Yealink One Talk CP960 Administrator'S Manual Download Page 258

Page: 258 / 533

Phone Customization

255

Attributes

Valid Values

Description

google_directory_search (not
applicable to VP59/CP960
phones)

display_name

Local Contacts

History

Remote Phonebook

LDAP

Network Directories

BroadSoft Buddies (not applicable
to CP960 phones)

Google Contacts (not applicable to
VP59/CP960 phones)

The display name of the directory list.

Note: We recommend that you do not edit this field.

priority

1 to 5 (for CP960 phones)

1 to 7 (for T58A phones)

1 to 6 (for VP59 phones)

1 is the highest priority.

The priority of the search results.

enable

0/1

0: Disabled

1: Enabled.

Enable or disable the phone to search the desired directory
list.

Customizing Search Source File

1. Open the search source file.

2. To configure each directory list, edit the values within double quotes in the corresponding field.

For example, enable the local directory search, disable the call log search and specify a priority.

3. Save the change and place this file to the provisioning server.

Search Source List Configuration

The following table lists the parameters you can use to configure the search source list.

Parameter super_search.url

<y0000000000xx>.cfg

Description It configures the access URL of the custom super search file.

Permitted
Values

URL within 511 characters

Default

Blank

Web UI

Directory > Settings > Search Source List In Dialing

Parameter search_in_dialing.local_directory.enable

<y0000000000xx>.cfg

Description

It enables or disables the phone to automatically search entries from the local directory, and display
results on the pre-dialing/dialing screen.

Permitted
Values

0-Disabled
1-Enabled

Summary of Contents for One Talk CP960






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for One Talk CP960

Reviews:

Related manuals for One Talk CP960

Brands by name

Popular brands

Yealink One Talk CP960, Administrator'S Manual

Search results

Summary of Contents for One Talk CP960

Reviews:

Related manuals for One Talk CP960

Brands by name

Popular brands