Phone Customization
203
5-Null
Default
0
Web UI
Settings > Call Display > Call Information Display Method
Parameter phone_setting.call_display_name.mode
<y0000000000xx>.cfg
Description
It specifies which display names to be used as the caller ID/callee ID for calls from/to contacts in the
phone directory.
Note: This parameter also affects the history records display.
Permitted
Values
0-Names matched to the entries in the following phone directories are displayed preferentially, the pri-
ority is as follows: Local Directory > Remote Phone Book > Broadsoft Network Directory > BroadCloud
Buddies > LDAP Directory > Network signaling.
1-Names provided through network signaling are displayed preferentially.
Default
0
Parameter account.X.update_ack_while_dialing
[1]
<MAC>.cfg
Description It enables or disables the phone to update the display of call ID according to the ACK message.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter account.X.refresh_remote_id.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to update the identity of the caller according to the request message
from the remote party.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter sip.disp_incall_to_info
[2]
<y0000000000xx>.cfg
Description
It enables or disables the phone to display the identity contained in the To field of the INVITE message
when it receives an incoming call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Display Method on Dialing
When the phone is on the pre-dialing or dialing screen, the account information will be displayed on the phone
screen.
Summary of Contents for One Talk CP960
Page 1: ......
