| Accessories with Your System |
103
Controlling VCC22 Camera by Remote Control
Procedure
1.
On your remote control, press the right navigation key twice to enter the cameras list.
2.
Select the desired camera and then press OK key.
3.
Press the navigation key to adjust the angle of the camera.
4.
Press or to adjust the focal length.
Controlling VCC22 Camera by CP960
Procedure
1.
When your system is idle, on your CP960, tap
Camera
.
2.
Tap
The current control camera
.
3.
Tap the desired camera.
4.
Tap
to return.
5.
Tap the navigation keys to adjust the camera angle.
6.
Press or to adjust the focal length.
Camera Layout
During a call, all video streams captured by the connected cameras are synthesized to one video stream, and then sent
to the far site. The supported camera layouts are as below:
•
1+N
: the video stream captured by the selected camera is given prominence in the largest pane. Others are
displayed in small panes.
•
Selected Speaker
: the video stream captured by the selected camera is displayed in a large pane.
•
Equal N×N
: all video streams are given equal prominence in equal-sized panes.
Controlling Multiple Remote Cameras
During a call, if one call party enables the Far Control Near Camera feature on his device, you can control the camera
of the call party. When the remote party connects multiple VCC22 video conferencing cameras, the camera you can
control depends on the remote camera layout:
• When the remote camera layout is 1+N, you can control the camera whose video image is displayed in the largest
pane.
• When the remote camera layout is Selected Speaker, you can control the camera whose video image is displayed
in the full screen.
• When the remote camera layout is Equal N×N and the remote uses VC800 system, you can control the VC800
camera.
• When the remote camera layout is Equal N×N and the remote uses VC880/PVT980 system, you can control the
first camera that the remote connects.
Summary of Contents for MeetingSpace VC880
Page 1: ......