User Guide for the VC800 Video Conferencing System
86
If
Auto
is selected, the system will select the appropriate bandwidth automatically.
8.
Press or to select
Save
and then press
to accept the change.
Note
Bandwidth is configurable via web user interface at the path
Setting
->
Call Features
->
Uplink
Bandwidth
/
Downlink Bandwidth
.
Audio Setting
Audio Output Device
The system supports the following audio devices:
Auto
(audio output device with the highest priority is selected automatically)
VCS Phone
(CP960 Conference phone)
HDMI
(built-in speakerphone of the display device)
Line Output
(speakerphone connected to the Line Out port on the VC800 codec)
The priority of bandwidth is as follows:
System bandwidth > Contact bandwidth (refer to
For example: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than
512bps, then the actual contact bandwidth will be 512bps. If contact bandwidth is set to a value
less than 512bps, then the actual contact bandwidth will be the value set by user.
Summary of Contents for MeetingSpace VC800
