Yealink MeetingSpace VC800, Administrator'S Manual

Page: 166 / 295

Administrator’s Guide for Yealink VC800 Video Conferencing System
152
4.
Select
Save
, and then press to accept the change.
Note
Content Sharing
If a PC is connected to the VCH50 video conferencing hub, the system will start a presentation
automatically. During a call, both local and remote display devices will display the contents. You
can also start/stop a presentation manually during a call. If you disconnect the PC, the
presentation will stop automatically.
Content sharing parameters on the system are described below:
Parameter Description Configuration Method
Frame
Specifies the frame rate of the
presentation.

30fps

15fps

5fps

1fps
Default
: 15fps
Web User Interface
Resolution
Specifies the resolution of the
presentation.

1080P

720P
Default
: 1080P
Web User Interface
To configure the presentation via web user interface:
1.
Click on
Setting
->
Video & Audio
.
2.
Select the desired value from the pull-down list of
Frame
.
The priority of bandwidth is as follows: system bandwidth>Contact bandwidth (refer to add local
contacts ).
For example: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than
512bps, than the actual contact bandwidth will be 512bps. If contact bandwidth is set to a value
less than 512bps, than the actual contact bandwidth will be the value set by user.