Yealink MeetingSpace VC500, Administrator'S Manual

Page: 223 / 281

System Management
207
The web user interface prompts ”Delete the calllog ‘xxx’
？
”
5.
Click
Confirm
to delete the call log.
You can also select
Delete All
from the from the pull-down list of
Delete Calllog
to delete all
call log.
Search Source List in Dialing
When you enter a few characters in the dialing screen, the system will search for contacts from
the enabled search source lists, and display the result in the dialing screen. The lists can be
History, Local Directory, Cloud Contacts, YMS contacts and LDAP.
Note
To match the desired list, you need to enable the search source list first. If you want to match the
LADP list, make sure LDAP is already configured. For more information on how to configure
LDAP, refer to
LDAP on page 200 .
To configure search source list in dialing via web user interface:
1.
Click on
Directory
->
Setting
.
2.
In the
Search Source List In Dialing
block, select the desired list from the
Disabled
column
and click .
The selected list appears in the
Enabled
column.
3.
Repeat step 2 to add more lists to the
Enabled
column.
4.
(Optional.) To remove a list from the
Enabled
column, select the desired list and then
click .
Cloud contacts and YMS contacts appear in the search source list only when you log into the
Yealink VC Cloud Management Service or register a YMS account.