Yealink MeetingSpace VC500, Administrator'S Manual

Page: 197 / 281

Configuring System Settings
181
To configure camera settings via web user interface:
1.
Click on
Setting
->
Camera
.
2.
Configure the camera settings.
3.
Click
Confirm
to accept the change.
To configure camera settings via the remote control:
1.
Select
More
->
Setting
->
Camera Setting
.
2.
Configure the camera settings.
3.
Select
Save
, and then press to accept the change.
Far-end Camera Control
Local video is displayed on the display device of the far site during a call. For the best view, you
can enable the
Far Control of Near Camera
feature to allow the far site to control the focus
and angle of the local camera.
Far-end camera control parameters are described below.
Parameter Description Configuration Method
Not FECC in
call(0~300s)
Configures the duration time (in
seconds) when far site cannot
control the local camera during a
call.
Default:
15
If it is set to 15, the far site is not
allowed to control the local camera
in the first 15 seconds of the call.
Web User Interface
Far Control Near
Camera
Enables or disables the far site to
control the local camera.
Default:
Enabled
Remote Control
Web User Interface
To configure far-end camera control via web user interface:
1.
Click on
Setting
->
Video & Audio
.
2.
Enter the desired time in the
Not FECC in call(0~300s)
field.