Yealink MeetingSpace VC500, Administrator'S Manual

Page: 190 / 281

Administrator’s Guide for Yealink VC800&VC500 Video Conferencing System
174
Mix Sending
Content sharing allows users to share content with other conference participants during a call.
When a PC is connected to the VCH50 video conferencing hub, the display device can display
both the camera video and the shared content. The content sharing feature is very useful in the
conference scenario in which content sharing is needed (for example: a slide or a flash).
During a conference call, the far site may not support receiving shared content. In this case, you
can enable mix sending feature on the system. Mix sending feature allows the sender to
compound multiple video streams (local image+shared content) to one video stream, and then
send it to the far site.
The mix sending parameter on the system is described below.
Parameter Description Configuration Method
Mix
Enables or disables the mix sending
feature on the system.
Default:
On
Web User Interface
To configure mix sending via web user interface:
4.
Click on
Setting
->
Video & Audio
.
5.
In the
Presentation
block, select the desired value from the pull-down list of
Mix
.
6.
Click
Confirm
to accept the change.
Using VCC22 Video Conferencing Cameras
You can connect up to 8 VCC22 video conferencing cameras to the VC800 video conferencing
system. For more information, refer to
Yealink VCC22 Camera Quick Start Guide .
VCC22 video conferencing cameras are not applicable to VC500 video conferencing endpoint.