Administrator’s Guide for SIP-T5 Series Smart Media Phones
712
Parameter
Permitted Values
Default
Configures whether to use audio/video encryption service for account X.
0
-Disabled
1
-Optional
2
-Compulsory
If it is set to 0 (Disabled), the IP phone will not use audio/voice encryption service.
If it is set to 1 (Optional), the IP phone will negotiate with the other IP phone what type of
encryption to utilize for the session.
If it is set to 2 (Compulsory), the IP phone is forced to use SRTP during a call.
X ranges from 1 to 16 (for SIP-T58V/T58A/T56A)
X is equal to 1 (for CP960)
Web User Interface:
Account->Advanced->RTP Encryption(SRTP)
Phone User Interface:
None
To configure SRTP feature via web user interface:
1.
Click
on
Account
->
Advanced
.
2.
Select the desired account from the pull-down list of
Account
.
3.
Select the desired value from the pull-down list of
RTP Encryption(SRTP)
.
4.
Click
Confirm
to accept the change.
Summary of Contents for CP969
