Getting Started
32
The phone status is displayed on the first page of the web user interface.
Basic Network Settings
In order to use your phones, you must set up basic network. You can use DHCP or configure a
static address to connect your phone to the network. If your phone cannot contact a DHCP
server for any reason, you need to configure network settings manually. The phone can support
either or both IPv4 and IPv6 addresses.
Note
Configuring the DHCP
You can configure DHCP for IPv4 or IPv6. The following takes IPv4 as an example:
To configure the DHCP via phone user interface:
1.
Tap
More
->
Advanced
(default password: admin) ->
Network
->
WAN Port
.
2.
Select the desired value (
IPv4
,
IPv6
or
IPv4 & IPv6
) from the pop-up dialog box of
IP
Mode
.
3.
Tap
IPv4
.
4.
Tap the
Type
field.
5.
Select
DHCP
from the pop-up dialog box of
Type
.
6.
Tap
Save
to accept the change.
If you want to configure DHCP for IPv6, select
IPv6
or
IPv4 & IPv6
from the
IP
Mode
in the
The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.
Summary of Contents for CP960 Skype for Business
Page 1: ......
Page 117: ...Basic Call Features 108 ...
