Yealink CP960 Skype for Business User Manual Download Page 39

Page: 39 / 174

Getting Started

No.

Item

Description

Tap to switch to the lowercase input
mode.

Using the Onscreen Dial Pad

Instead of using the onscreen keyboard, you can also use the dial pad on the dialing screen to
enter data. The onscreen dial pad only provides digit keys, # key and * key.

Note

Phone Status

You can view phone status via phone user interface or web user interface.

Available information of phone status includes:



General information (IPv4 address or IPv6 address, MAC address and firmware version).

IPv4 uses a 32-bit address.

IPv6 is an updated version of the current Internet Protocol to meet the increased
demands for unique IP addresses, using a 128-bit address.



Network status (IPv4 status or IPv6 status, IP mode, and phone MAC address).



Phone status (product name, hardware version, firmware version, product ID, phone MAC
address and device certificate status).



Location information (location is set to assist emergency responder)



License (device license status and validity)

Viewing the Phone Status

You can view phone status via phone user interface or web user interface.

When using the onscreen dial pad, you can tap to display the onscreen keyboard. For more
information, refer to

Using the On-screen Keyboard

on page

Summary of Contents for CP960 Skype for Business















































































































































































Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands

Yealink CP960 Skype for Business, User Manual

Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands