Yealink CP920, User Manual

Page: 27 / 176

Getting Started
17
The phone status is displayed on the first page of the web user interface.
Basic Network Settings
If your phone cannot contact a DHCP server for any reason, you need to configure network
settings manually. The IP phone can support either or both IPv4 and IPv6 addresses.
To configure the IP mode via phone user interface:
1.
Tap
Menu
->
Settings
->
Advanced Settings
(default password: admin) ->
Network
->
WAN
Port
.
2.
Tap the or soft key to select
IPv4
,
IPv6
or
IPv4 & IPv6
from the
IP Mode
field.
3.
Tap the
Save
soft key to accept the change or the
Back
soft key to cancel.
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as
IPv4
or
IPv4 & IPv6
.
To configure a static IPv4 address via phone user interface:
1.
Tap
Menu
->
Settings
->
Advanced Settings
(default password: admin) ->
Network
->
WAN
Port
.
2.
Tap the soft key to select
IPv4
and then tap the
Enter
soft key.