YealinkCP860 Phones Configuring Guide
28
It enables or disables the phone to perform a remote phone book search for an incoming
or outgoing call and display the matched call on the LCD screen.
3.
Enter the value in the
Search Flash Time (Seconds)
field.
It configures how often to refresh the local cache of the remote phone book. The value
should be integer from 3600 to 1296000.
4.
Mark the desired radio box of the
Refresh When Accessing Remote Phonebook
field.
It enables or disables the phone to refresh the local cache of the remote phone book every
time the phone accesses the remote phone book.
5.
Click
Save changes
to accept the change.
6.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Downloading Configuration Files
on page
Search Source List in Dialing
You can search for a contact from the desired lists when the phone is in the dialing screen. The
lists can be Local Directory, History, Remote Phone Book and LDAP.
You can
specify the priority of
these lists
in the search results.
1 is the highest priority, 6 is the
lowest priority. If the priority is set to Disabled, the IP phone cannot search the list when
searching for contacts.
Summary of Contents for CP860 SERIES
Page 1: ......
Page 6: ...YealinkCP860 Phones Configuring Guide vi...
Page 18: ...YealinkCP860 Phones Configuring Guide 10...
