Yealink CP860 SERIES, Administrator'S Manual

Page: 82 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
56
2.
Enter the desired host name in the
DHCP Hostname
field.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
Configuring Network Parameters Manually
If DHCP is disabled or IP phones cannot obtain network parameters from the DHCP server, you
need to configure them manually. The following parameters should be configured for IP
phones to establish network connectivity:

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS
Procedure
Network parameters can be configured manually using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure network parameters of the IP phone
manually.
Parameters:
static.network.internet_port.type
static.network.ip_address_mode
static.network.internet_port.ip
static.network.internet_port.mask
static.network.internet_port.gateway