Yealink CD860, Administrator'S Manual

Page: 703 / 1039

Configuring Advanced Features
681
Parameters Permitted Values Default
Description:
Configures whether preferentially to use the static DNS cache for domain name
resolution of the server for account X.
0-Use domain name resolution from the DNS server preferentially
1-Use static DNS cache preferentially
X ranges from 1 to 16 (for SIP VP-T49G/SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.static_cache_pri = 1
Web User Interface:
None
Phone User Interface:
None
VLAN (Virtual Local Area Network) is used to logically divide a physical network into
several broadcast domains. VLAN membership can be configured through software
instead of physically relocating devices or connections. Grouping devices with a
common set of requirements regardless of their physical location can greatly simplify
network design. VLANs can address issues such as scalability, security and network
management.
The purpose of VLAN configurations on the IP phone is to insert tag with VLAN
information to the packets generated by the IP phone. When VLAN is properly
configured for the ports (Internet port and PC port) on the IP phone, the IP phone will tag
all packets from these ports with the VLAN ID. The switch receives and forwards the
tagged packets to the corresponding VLAN according to the VLAN ID in the tag as
described in IEEE Std 802.3.
VLAN on IP phones allows simultaneous access for a regular PC. This feature allows a PC
to be daisy chained to an IP phone and the connection for both PC and IP phone to be
trunked through the same physical Ethernet cable.