EtherAnt II User’s Manual
3.3 General
Information
The
General Information
screen is shown in Figure 3.2. Notice that there are two other buttons at the top
of this window,
Configuration
and
Utilities
. These buttons will be discussed later in this manual.
The two buttons on the left –
Save Settings,
and
Reload Settings
– are explained below. The four fields
at the bottom of the screen,
Host Computer Name, Host Computer IP, Ethernet Converter Name,
and
Ethernet Converter IP
, will also be discussed. Lastly, at the top of your screen, several drop-down menu
items are available. They are:
File, Edit, View, Command, Tools,
and
Help
.
Figure 3.2 – General Information Screen
Save Settings
Pressing this button will place all changed parameters into the attached EC.
Reload Settings
Pressing this button will restore the parameters that are currently saved in the attached EC.
General Information
This screen automatically displays information about the connection with the device you selected. The
Status Bar on the bottom of the window should indicate
Connected
if you have a connection. If the Status
Bar reads
Not Connected
, then you are not connected with the device. Other information displayed in this
window includes:
Current EC Connection –
This read-only property displays whether the EC is currently associated with a
network. It will read either
Not Associated
, or
Associated.
Network Name –
This read-only property displays the name of the network that the EC is currently
associated with.
Channel ID –
This read-only property displays the Channel ID of the network that the EC is currently
associated with.
Encryption –
This read-only property displays whether the EC currently has Encryption disabled or
enabled.
Version 3.3
Page 10
March 2003
Summary of Contents for EtherAnt II
Page 1: ...Version 3 3 March 2003 ...
Page 27: ...EtherAnt II User s Manual Version 3 3 Page 24 March 2003 ...
Page 28: ......
