ASSEMBLY INSTRUCTIONS
6
Align the wheel axle with either
the Top or Bottom slot of the
Fork.
Tighten the Wheel Bolt (No. 3.1)
on both sides and ensure the
Locking Washers (No. 3.2) fit into
the hole in the fork.
3. Attaching the Wheels to the Body
(WARNING: Make sure shaft sets are tightened and not loose)
3
3.1
2
3.2
3.3
4
3.1
3.2
4
When the wheels are in the bottom slot
ensure the Locking Washer
(No. 3.2)
is
located in the hole above the wheel slot.
If the Wheels are fitted in the top slot,
ensure the Locking Washer
(No. 3.2)
is
fitted in the hole below the wheel slot.
Please NOTE!
