Yazoo/Kees ZEKH42200, Operator'S Manual

Page: 48 / 80

English-
46
MAINTENANCE
Belt installation
• Wrap the IZT belt around the IZT pulleys.
• Route the belt around the inside of the
idler pulley.
• Now you can wrap the belt around the
engine pulley.
• Reattach the spring on the pump idler
arm if previously disconnected.
• Reinstall the deck belt onto the electric
clutch pulley (see to replace deck belt in
this section of the manual).
Checking the Blades
In order to attain the best mowing effect, it is
important that the blades are well sharpened
and not damaged.
Bent or cracked blades or blades with large
nicks should be replaced.
Check the blade mounts.
Damaged blades should be replaced when
hitting obstacles that result in a breakdown.
Let the service workshop decide whether the
blade can be repaired/ground or must be
replaced.
8011-604
Check the blades
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
IMPORTANT INFORMATION
The sharpening of blades should be
carried out by an authorized service
workshop.
3
1
2
5
6
4
7
1. Spring loaded idler pulley
2. Fixed idler pulley
3. Engine
4. IZT belt
5. Left drive pulley
6. Right drive pulley
7. Square hole
IZT belt routing