1
2
PLACE THE 2D ON THE ROTATION WITH THE
ARROWS FACING EACH
OTHER.THEN PUT THE
DESIGN LEGS IN PLACE.
3
4
SCREW BOTH SIDES TOGETHER AS
SHOWN ON THE DRAWING.
OPEN BOTH LOCKING MECHANISMS WHERE THE
OPEN SIGN INDICATES IT.
5
6
REMOVE THE FLAT CABLE CLAMPING STRAP
AND HANG THE FLAT CABLE BACKWARDS.
CONNECTION TEST: TURN THE SIMULATOR ON, WAIT
UNTIL IT LIGHTS UP, THEN TURN IT OFF AND CONTINUE
ASSEMBLY.
MAKE SURE THE 4 ROLLERS ARE IN PLACE.
USER
GUIDE
BEFORE YOU START ASSEMBLING THE YAW2, WE SUGGEST TO ASK A FRIEND, FAMILY MEMBER OR A NEIGHBOR
FOR SOME HELP. SINCE THE PARTS ARE LARGE AND RELATIVELY HEAVY, YOU MIGHT NEED SOME ASSISTANCE.
REMOVE ALL THE LABELS AFTER THE RELEVANT STEP IS FINISHED.
REMOVE THE
FASTENING STRIPS
FROM THE ROTATION,
THEN THE TAPE
PROTECTING THE
CONNECTOR ON THE
BOTTOM OF THE 2D.
1 / 4
SKIP THIS STEP IF YOU DON’T HAVE
THE ROTATION PLATFORM.
SKIP THIS STEP IF YOU DON’T HAVE
THE ROTATION PLATFORM!
SKIP THIS STEP IF YOU DON’T HAVE
THE ROTATION PLATFORM.
IF THE ROLLERS FELL
OUT, PUT THEM IN THE
COMPARTMENTS CLOSER
TO THE EDGES OF THE
DEVICE
