1
Spot Welding Application Using an Air Gun
1.4
Setting Welding Conditions (for Air Gun)
1-17
1.4
Setting Welding Conditions (for Air Gun)
1.4.1 Settings for Manual Spot Welding
Manual Spot Window
A. TWO GUN CONTROL
Specifies whether the simultaneous control is turned ON or OFF when
using two guns.
B. GUN NO.
Specifies the gun number of the gun to be used for manual spot weld-
ing.
C. WELDING COND (WTM)
Specifies the manual spot welding condition number to be used for
welding.
D. ACTION MODE
Specifies the gun operation mode.
Shows the gun open status before and after the welding.
A
B
C
D
25 of 56
