manualshive.com logo in svg

YASKAWA VIPA System SLIO, Manual

Share
Download
YASKAWA VIPA System SLIO Manual Download Page 322

13.10.3  Transfer via memory card

The memory card serves as external storage medium. There may be stored several proj-

ects and sub-directories on a memory card. Please regard that your current project is

stored in the root directory and has one of the following file names:

n

S7PROG.WLD

n

AUTOLOAD.WLD

1.

Start the Siemens TIA Portal with your project.

2.

Create a wld file with 

‘Project

 

è

 Memory card file

 

è

 New’

.

ð

The wld file is shown in the 

Project tree

 at "SIMATIC Card Reader" as "Memory

card file".

3.

Copy the blocks from the 

Program blocks

 to the wld file. Here the hardware configu-

ration data are automatically copied to the wld file as "System data".

4.

Copy the wld file at a suited memory card. Plug this into your CPU and start it

again.

ð

The transfer of the application program from the memory card into the CPU

takes place depending on the file name after an overall reset or PowerON.

S7PROG.WLD

 is read from the memory card after overall reset.

AUTOLOAD.WLD

 is read from the memory card after PowerON.

The blinking of the SD LED of the CPU marks the active transfer. Please regard

that your user memory serves for enough space for your user program, other-

wise your user program is not completely loaded and the SF LED gets on.

Proceeding

VIPA System SLIO

Configuration with TIA Portal

TIA Portal - Project transfer > Transfer via memory card

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

322

Summary of Contents for VIPA System SLIO





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands