manualshive.com logo in svg

YASKAWA VIPA System SLIO, Manual

Share
Download
YASKAWA VIPA System SLIO Manual Download Page 296

13.2  TIA Portal - Functional limitations

Please note that the performance data of the CPU from VIPA is limited to the perform-

ance data of the Siemens CPU used for the configuration.

Due to the system 

‘Upload device as new station...’

 is currently not supported. Instead,

use the 

backup

 and 

restore

 functions in the Siemens TIA Portal:

1.

To 

backup

 an online connected CPU, select 

‘Online

 

è

 Backup from online device’

.

ð

A 

backup

 object is created and stored in the 

project navigation

 at 

‘Online

backups’

. The backup contains all blocks of the project and the current device

status.

2.

To 

restore

 into an online connected CPU it must be overall reset first. Then click in

the 

project navigation

 under 

‘Online backups’

 on the created 

backup

 and select

‘Context menu

 

è

 Download to device’

.

ð

The backup data is transferred online to the CPU.

Due to the system, online blocks of CPUs connected via 

‘Accessible devices’

 are cur-

rently not listed.

13.3  TIA Portal - Hardware configuration - CPU

The hardware configuration of the CPU and its plugged modules happens in the Siemens

TIA Portal by means of a virtual PROFINET IO device. For the PROFINET interface is

standardized software sided, the functionality is guaranteed by including a GSDML file

into the Siemens TIA Portal.

The hardware configuration of the CPU is divided into the following parts:

n

Installation PROFINET IO device 

‘VIPA SLIO System’

n

Configuration Siemens CPU

n

Connection SLIO CPU as PROFINET IO device

The installation of the PROFINET IO devices 

‘VIPA SLIO System’

 happens in the hard-

ware catalog with the following approach:

1.

Go to the service area of www.vipa.com.

2.

Load from the download area at 

‘Config files

 

è

 PROFINET’

 the according file for

your System SLIO.

3.

Extract the file into your working directory.

4.

Start the Siemens TIA Portal.

5.

Close all the projects.

6.

Switch to the 

Project view

.

7.

Select 

‘Options

 

è

 Install general station description file (GSD)’

.

8.

Navigate to your working directory and install the according GSDML file.

ð

After the installation the hardware catalog is refreshed and the Siemens TIA

Portal is finished.

After restarting the Siemens TIA Portal the according PROFINET IO device can

be found at 

Other field devices > PROFINET > IO > VIPA GmbH > VIPA SLIO

System

.

Limitation of performance

data

No  ‘Upload device as new

station...’

No online blocks

Overview

Installation PROFINET IO

device  ‘VIPA SLIO

System’

VIPA System SLIO

Configuration with TIA Portal

TIA Portal - Hardware configuration - CPU 

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

296

Summary of Contents for VIPA System SLIO





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands