![YASKAWA VIPA System SLIO Manual Download Page 285](http://html.mh-extra.com/html/yaskawa/vipa-system-slio/vipa-system-slio_manual_907132285.webp)
Operating parameters
Description
Assignment
10kHz
40
µ
s
30kHz
13
µ
s
60kHz
6.7
µ
s
100kHz
4
µ
s
Hardware interrupt
Description
Assignment
End of measurement
Hardware interrupt at end of measurement
de-activated
12.6.7
Pulse width modulation - PWM
12.6.7.1
Overview
n
2 channels
n
Sub module
‘Counter’
n
Chap. 5.8 ‘Pulse width modulation - PWM’ page 153
12.6.7.2
Parametrization in SPEED7 Studio
12.6.7.2.1
‘I/O addresses’
Sub module
Input address
Access
Assignment
Count
816
DINT
reserved
820
DINT
reserved
824
DINT
reserved
828
DINT
reserved
Sub module
Output address
Access
Assignment
Count
816
DWORD
reserved
820
DWORD
reserved
824
DWORD
reserved
828
DWORD
reserved
12.6.7.2.2
‘Channel x’
Select via
‘Channel’
the channel and select for pulse width modulation via
‘Operating
mode’
the operating mode
‘Pulse width modulation’
. Default values and structure of this
dialog box depend on the selected
‘Operating mode’
. The following parameters are sup-
ported:
Operating mode
VIPA System SLIO
Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Pulse width modulation - PWM
HB300 | CPU | 013-CCF0R00 | en | 19-30
285