Mounting shield bus carrier
The shield bus carrier (available as accessory) serves to carry
the shield bus to connect cable shields. The shield bus carrier is
mounted underneath the terminal of the terminal module. With a
flat mounting rail for adaption to a flat mounting rail you may
remove the spacer of the shield bus carrier.
2.5 Demounting and module exchange
With demounting and exchange of a module, head module (e.g. bus
coupler) or a group of modules for mounting reasons you have
always to remove the electronic module of the just mounted right
module. After the mounting it may be plugged again.
Exchange of an electronic module
1.
For the exchange of an electronic module, the electronic module
may be pulled forward after pressing the unlocking lever at the
lower side of the module.
2.
For installation plug the electronic module guided by the strips at
the lower side until this engages audible to the terminal module.
Proceeding
VIPA System SLIO FM 050S
Basics and Assembly
Demounting and module exchange
HB300 | FM | 050-1BS00 | GB | 15-11
19
