4.2 Using the Digital Operator
Use the digital operator to enter Run and Stop commands, edit parameters, and display data including fault and alarm
information.
u
Digital Operator Keys and Displays
LO
RE
F2
F1
ESC
RUN
STOP
ENTER
RESET
ALM
DIGITAL OPERATOR
12
11
9
8
1
2
3
10
4
5 6
7
Figure 4.1 Keys and Displays on the Digital Operator
No.
Display
Name
Function
1
F1
F2
Function Key
(F1, F2)
The functions assigned to F1 and F2 vary depending on the currently displayed menu. The
name of each function appears in the lower half of the display window.
2
ESC
ESC Key
• Returns to the previous display.
• Moves the cursor one space to the left.
• Pressing and holding this button will return to the Frequency Reference display.
3
RESET Key
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
4
RUN
RUN Key
Starts the drive in LOCAL mode.
5
Up Arrow Key
Scrolls up to display the next item, selects parameter numbers, and increments setting
values.
6
Down Arrow Key
Scrolls down to display the previous item, selects parameter numbers, and decrements
setting values.
7
STOP
STOP Key
Stops drive operation.
8
ENTER Key
• Enters parameter values and settings.
• Selects a menu item to move between displays
9
Switches drive control and frequency setting between the operator (LOCAL) and an
external source (REMOTE).
10
RUN Light
Lit while the drive is operating the motor.
for details.
11
LO/RE Light
Lit while the operator is selected to run the drive (LOCAL mode).
for details.
12
ALM LED Light
Lit when the drive detects an alarm or error.
Refer to ALARM (ALM) LED Displays on page 137
external Run command source. To disable the STOP key priority, set parameter o2-02 to 0.
LOCAL and REMOTE, set parameter o2-01 to 0.
4.2 Using the Digital Operator
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
135
4
Start-Up Programming & Operation
Summary of Contents for U1000 iQpump Drive
Page 705: ......
