YASKAWA U1000 iQpump Drive, Technical Manual, Page: 682 / 706

E.3 User Setting Table
Use the Verify Menu to determine which parameters have been changed from their original default settings
below the parameter number indicates that the parameter setting can be changed during run.
Parameter names in bold face type are included in the Setup Group of parameters, which can be set by A1-06 = 0.
No. Name
User
Setting
A1-00
Language Selection
A1-01
Access Level Selection
A1-02 Control Method Selection
A1-03 Initialize Parameters
A1-04 Password
A1-05 Password Setting
A1-06 Application Preset
A1-07 DriveWorksEZ Function Selection
A2-01 to
A2-32
User Parameters, 1 to 32
A2-33 User Parameter Automatic Selection
b1-01 Frequency Reference Selection 1
b1-02 Run Command Selection 1
b1-03 Stopping Method Selection
b1-04 Reverse Operation Selection
b1-05 Action Selection below Minimum Output Frequency
b1-06 Digital Input Reading
b1-07 LOCAL/REMOTE Run Selection
b1-08 Run Command Selection while in Programming Mode
b1-14 Phase Order Selection
b1-15 Frequency Reference Selection 2
b1-16 Run Command Selection 2
b1-17 Run Command at Power Up
b1-21
Start Condition Selection at Closed Loop Vector
Control
b1-24 Commercial Power Switching Selection
b1-25
Commercial Power Switching Output Frequency
Non-coincidence Level
b1-26
Commercial Power Switching Output Frequency
Coincidence Level
b2-01 DC Injection Braking Start Frequency
b2-02 DC Injection Braking Current
b2-03 DC Injection Braking Time at Start
b2-04 DC Injection Braking Time at Stop
b2-08 Magnetic Flux Compensation Value
b3-01 Speed Search Selection at Start
b3-03 Speed Search Deceleration Time
b3-04
V/f Gain during Speed Search (Speed Estimation
Type)
No. Name
User
Setting
b3-05 Speed Search Delay Time
b3-06
Output Current 1 during Speed Search (Speed
Estimation Type)
b3-08
Current Control Gain during Speed Search (Speed
Estimation Type)
b3-10
Speed Search Detection Compensation Gain (Speed
Estimation Type)
b3-14
Bi-Directional Speed Search Selection (Speed
Estimation Type, Speed Estimation 2 Type, Current
Detection 3 Type)
b3-17
Speed Search Restart Current Level (Speed
Estimation Type)
b3-18
Speed Search Restart Detection Time (Speed
Estimation Type)
b3-19
Number of Speed Search Restarts (Speed Estimation
Type)
b3-24 Speed Search Method Selection
b3-25 Speed Search Wait Time (Speed Estimation Type)
b3-27 Start Speed Search Select
b3-29 Speed Search Induced Voltage Level
b3-31
Speed Search Operation Current Level 1 (Current
Detection Type 2)
b3-32
Speed Search Operation Current Level 2 (Current
Detection 2)
b3-33
Speed Search Selection when Run Command is Given
during Uv
b3-50 Backspin Search Direction Judgment Time 1
b3-51 Backspin Search Direction Judgment Time 2
b3-52 Backspin Search Deceleration Time 1
b3-53 Backspin Search Deceleration Time 2
b4-01 Timer Function On-Delay Time
b4-02 Timer Function Off-Delay Time
b4-03 H2-01 ON Delay Time
b4-04 H2-01 OFF Delay Time
b4-05 H2-02 ON Delay Time
b4-06 H2-03 OFF Delay Time
b4-07 H2-03 ON Delay Time
b4-08 H2-03 OFF Delay Time
b5-01 PID Function Setting
b5-02
Proportional Gain Setting (P)
b5-03
Integral Time Setting (I)
E.3 User Setting Table
682 YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual