n
T2-07: PM Motor Base Frequency
Enter the motor base frequency in Hz.
Note:
T2-07 will be displayed when in OLV/PM.
No.
Name
Setting Range
Default
T2-07
PM Motor Base Frequency
0.0 to 400.0 Hz
87.5 Hz
n
T2-08: Number of PM Motor Poles
Enter the number of motor poles.
No.
Name
Setting Range
Default
T2-08
Number of PM Motor Poles
2 to 48
6
n
T2-09: PM Motor Base Speed
Enter the motor rated speed in r/min.
Note:
T2-09 will be displayed when in AOLV/PM and CLV/PM.
No.
Name
Setting Range
Default
T2-09
PM Motor Base Speed
0 to 24000 r/min
1750 r/min
n
T2-10: PM Motor Stator Resistance
Enter the motor stator resistance per motor phase.
No.
Name
Setting Range
Default
T2-10
PM Motor Stator Resistance
0.000 to 65.000 Ω
Determined by T2-02
n
T2-11: PM Motor d-Axis Inductance
Enter the d-Axis inductance per motor phase.
No.
Name
Setting Range
Default
T2-11
PM Motor d-Axis Inductance
0.00 to 600.00 mH
Determined by T2-02
n
T2-12: PM Motor q-Axis Inductance
Enter the q-Axis inductance per motor phase.
No.
Name
Setting Range
Default
T2-12
PM Motor q-Axis Inductance
0.00 to 600.00 mH
Determined by T2-02
n
T2-13: Induced Voltage Constant Unit Selection
Selects the units used for setting the induced voltage coefficient.
No.
Name
Setting Range
Default
T2-13
Induced Voltage Constant Unit Selection
0, 1
1
Setting 0: mV (r/min)
Setting 1: mV (rad/sec)
Note:
If T2-13 is set to 0, then the drive will use E5-24 (Motor Induction Voltage Constant 2), and will automatically set E5-09 (Motor Induction
Voltage Constant 1 (Ke)) to 0.0. If T2-13 is set to 1, then the drive will use E5-09 and will automatically set E5-25 to 0.0.
n
T2-14: PM Motor Induced Voltage Constant (Ke)
Enter the motor induced voltage constant (Ke).
No.
Name
Setting Range
Default
T2-14
PM Motor Induced Voltage Constant (Ke)
0.0 to 2000.0
Determined by T2-02
4.7 Auto-Tuning
168
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
Summary of Contents for U1000 iQpump Drive
Page 705: ......
