YASKAWA U1000 iQpump Drive, User Manual

Page: 151 / 426

n E2-04: Number of Motor Poles
Set the number of motor poles to E2-04. If Auto-Tuning completes successfully, the value entered to T1-06 will automatically
be saved to E2-04.
No. Parameter Name Setting Range Default
E2-04 Number of Motor Poles 2 to 48 2
n H1-01 to H1-08: Functions for Terminals S1 to S8
These parameters assign functions to the multi-function digital inputs. The various functions and settings are listed in Table
4.12 .
No. Parameter Name
Setting
Range
Default
H1-01 Multi-Function Digital Input Terminal S1 Function Selection 0 to B0
40 (F)
<1>
: Forward Run Command (2-Wire sequence)
H1-02 Multi-Function Digital Input Terminal S2 Function Selection 0 to B0 F (F): Through Mode
H1-03 Multi-Function Digital Input Terminal S3 Function Selection 0 to B0 26: External Pump Fault
H1-04 Multi-Function Digital Input Terminal S4 Function Selection 0 to 9F 14: Fault Reset
H1-05 Multi-Function Digital Input Terminal S5 Function Selection 0 to B0
8D (0)
<1>
: Multi Setpoint 1
H1-06 Multi-Function Digital Input Terminal S6 Function Selection 0 to B0
80 (3)
<1>
: HAND Mode
H1-07 Multi-Function Digital Input Terminal S7 Function Selection 0 to B0
81 (4)
<1>
: HAND Mode 2
H1-08 Multi-Function Digital Input Terminal S8 Function Selection 0 to B0
F
<1>
: Through Mode
<1> Number appearing in parenthesis is the default value after performing a 3-Wire initialization (A1-03 = 3330).
Table 4.12 Multi-Function Digital Input Terminal Settings
Setting Function
0 3-Wire sequence
2 External Reference 1/2 Selection
3 Multi-Step Speed Reference 1
4 Multi-Step Speed Reference 2
5 Multi-Step Speed Reference 3
6 Jog reference selection
7 Accel/decel time selection 1
8 Baseblock command (N.O.)
9 Baseblock command (N.C.)
A Accel/decel ramp hold
B Drive overheat alarm (oH2)
C Analog terminal input selection
F Through mode
10 Up command
11 Down command
12 Forward Jog
13 Reverse Jog
14 Fault reset
15 Fast Stop (N.O.)
17 Fast Stop (N.C.)
18 Timer function input
19 PID disable
1A Accel/decel time selection 2
1B Program lockout
1E Reference sample hold
20 to 2F Ext. pump fault
30 PID integral reset
31 PID integral hold
Setting Function
32
Multi-Step Speed
Reference 4
34 PID soft starter cancel
35 PID input level selection
40
Forward run command
(2-Wire sequence)
41
Reverse run command
(2-Wire sequence)
42
Run command
(2-Wire sequence 2)
43
FWD/REV command
(2-Wire sequence 2)
47 Node setup
51 Sequence Timer Disable
52 Sequence Timer Cancel
60 DC Injection Braking command
61
External Speed Search
command 1
62
External Speed Search
command 2
63 Field weakening
67 Communications test mode
68 High Slip Braking (HSB)
6A Drive enable
73 Low City Press
75 Up 2 command
76 Down 2 command
80 HAND Mode
81 HAND Mode 2
82 PI Switch to Aux
4.7 Basic U1000 iQpump Setup and Application Preset Parameters
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual 151
4
Start-Up Programming & Operation