background image

4

YASKAWA ELECTRIC

 SIEP C730600 89C YASKAWA AC Drive Option SI-EP3 Technical Manual

1  Preface and Safety

1

Preface and Safety

YASKAWA Electric supplies component parts for use in a wide variety of industrial applications. The selection and 
application of YASKAWA products remain the responsibility of the equipment designer or end user. 
YASKAWA accepts no responsibility for the way its products are incorporated into the final system design. Under no 
circumstances should any YASKAWA product be incorporated into any product or design as the exclusive or sole safety 
control. Without exception, all controls should be designed to detect faults dynamically and fail safely under all 
circumstances. All products designed to incorporate a component part manufactured by YASKAWA must be supplied to 
the end user with appropriate warnings and instructions as to the safe use and operation of that part. Any warnings 
provided by YASKAWA must be promptly provided to the end user. YASKAWA offers an express warranty only as to 
the quality of its products in conforming to standards and specifications published in the manual. NO OTHER 
WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. YASKAWA assumes no liability for any personal injury, 
property damage, losses, or claims arising from misapplication of its products.

Applicable Documentation

The following manuals are available for the option:

Option

YASKAWA AC Drive Option 

SI-EP3 PROFINET 

Installation Manual

Manual No: TOBP C730600 89

This guide is packaged together with the product and contains information necessary to install 
the option and set related drive parameters.

YASKAWA AC Drive Option 

SI-EP3 PROFINET 

Technical Manual

Manual No: SIEP C730600 89

(This book)

The technical manual contains detailed information about the option pertaining to 
communication protocols, and supported features and messaging. Access the following sites to 
obtain the technical manual:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Check the back cover of these manuals.
For questions, contact Yaskawa or a Yaskawa representative.

Drive

YASKAWA AC Drive

Manuals

Drive manuals contain basic installation and wiring information in addition to detailed parameter 
setting, fault diagnostic, and maintenance information. 
The most recent versions of these manuals are available for download on our documentation 
websites:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Check the back cover of these manuals.
For questions, contact Yaskawa or a Yaskawa representative.

Summary of Contents for SI-EP3



























































Reviews: