xiii
Storage Precautions
Transportation Precautions
C
A
UTION
Do not place an excessive load on the product during storage. (Follow all instructions on the
packages.)
There is a risk of injury or damage.
NOTICE
Do not install or store the product in any of the following locations.
•
Locations that are subject to direct sunlight
•
Locations that are subject to ambient temperatures that exceed product specifications
•
Locations that are subject to relative humidities that exceed product specifications
•
Locations that are subject to condensation as the result of extreme changes in temperature
•
Locations that are subject to corrosive or flammable gases
•
Locations that are near flammable materials
•
Locations that are subject to dust, salts, or iron powder
•
Locations that are subject to water, oil, or chemicals
•
Locations that are subject to vibration or shock that exceeds product specifications
•
Locations that are subject to radiation
If you store or install the product in any of the above locations, the product may fail or be damaged.
Although machined surfaces are covered with an anticorrosive coating, rust can develop due to
storage conditions or the length of storage. If you store the product for more than six months,
reapply an anticorrosive coating to machined surfaces, particularly the motor shaft.
Consult with your Yaskawa representative if you have stored products for an extended period of
time.
C
A
UTION
Transport the product in a way that is suitable to the mass of the product.
Do not hold onto the cables or motor shaft when you move a Servomotor.
There is a risk of disconnection, damage, or injury.
Do not use the eyebolts on a SERVOPACK or Servomotor to move the machine.
There is a risk of damage or injury.
When you handle a SERVOPACK or Servomotor, be careful of sharp parts, such as the corners.
There is a risk of injury.
Do not place an excessive load on the product during transportation. (Follow all instructions on
the packages.)
There is a risk of injury or damage.
