2.5 Selecting Peripheral Devices
2-25
2
2.5.2 Molded-case Circuit Breaker and Fuse Capacity
* 1. Nominal value at the rated load. The specified derating is required to select an appropriate
fuse capacity. Refer to
4.4.8 Molded-case Circuit Breaker (MCCB)
* 2. The cutoff characteristics (25
°
C): 200% two seconds min., 700% 0.01 seconds min.
Note: Do not use a fast-acting fuse. Because the SERVOPACK’s power supply is a capacitor
input type, a fast-acting fuse may blow when the power is turned ON.
The SGDS SERVOPACK does not include a protective grounding circuit. To ensure safety in the system,
install a ground-fault protector against overloads and short-circuit, or a ground fault protector dedicated for
protective grounding combined with the molded-case circuit breaker.
Name
Type
Specifications
f
Battery for Absolute Encoder
Note: No battery is mounted in the battery
case. A battery must be purchased separately.
JUSP-BA01
Battery case
JZSP-BA01
(To mount in the battery case)
ER6VC3N
To connect to a host controller (provided by a
customer)
3.6 V 2000 mAh,
manufactured by Toshiba Battery Co., Ltd.
Main Circuit
Power Supply
SERVOPACK Model
Power Supply Capacity
per SERVOPACK
(kVA)
Current Capacity of
Breaker or Fuse
(A
rms
)
∗
1
,
∗
2
Capacity
(kW)
SGDS
-
Single-phase
100 V
0.05
A5F
0.25
4
0.10
01F
0.40
0.20
02F
0.60
6
0.40
04F
1.2
12
Single-phase
200 V
0.05
A5A
0.25
4
0.10
01A
0.40
0.20
02A
0.75
0.40
04A
1.2
8
0.75
08A
2.1
16
Three-phase
200 V
1.0
10A
2.3
7
1.5
15A
3.2
10
2.0
20A
4.3
13
3.0
30A
5.9
17
IMPORTANT
SIEPS80000025.book 25 ページ ２００４年１０月２５日 月曜日 午前１１時５７分
