5.1 Manipulating SERVOPACK Parameters (Pn
)
5.1.3 Setting Methods for SERVOPACK Parameters
5-5
5
Basic Functions That Requir
e Setting befor
e Operation
5.1.3
Setting Methods for SERVOPACK Parameters
You can use the S or a Digital Operator to set the SERVOPACK parameters.
A sample operating procedure is given below.
Setting SERVOPACK Parameters with the S
1.
Click the
Servo Drive Button in the workspace of the Main Window of the S.
2.
Select
Edit Parameters
in the Menu Dialog Box.
The Parameter Editing Dialog Box will be displayed.
3.
Click the cell of the parameter to edit.
If the parameter to edit is not displayed in the Parameter Editing Dialog Box, click the
or
Button
to display the parameter to edit.
4.
Change the setting of the parameter.
5.
Press the
Enter
Key.
The background of the edited parameter cell will change to green.
1. For a parameter for a numeric setting, input the numeric setting.
2. If the parameter requires selection of a function, select the function from the list of
selections.
Information
