12.9 The M-EXECUTOR Function Module
12-69
12
Function
s
of the Contr
oller
S
ection
M-EXECUTOR Function Module Detail Settings
The detailed settings for the M-EXECUTOR Function Module are performed on the Module
Configuration Definition Tab Page and the Detail Dialog Box.
This section provides the procedures to display this tab page and dialog box, and describes
their contents.
Module Configuration Definition Tab Page
Use the following procedure to display the Module Configuration Definition Tab Page.
•
Click the
Module Configuration
Button from the Start Tab Page.
The information on the M-EXECUTOR Function Module is displayed in the M-EXECUTOR cell
of the Function Module/Slave Column.
The following table describes the items that are displayed on the Module Configuration Defini-
tion Tab Page.
No.
Item
Display/Setting Item
Editing
Function Module/Slave
Displays whether the M-EXECUTOR Function Mod-
ule is enabled.
•
UNDEFINED: Disabled
•
M-EXECUTOR: Enabled
Possible
Status
Displays the status of the M-EXECUTOR Function
Module.
Possible
Circuit No./Axis Address
Not used.
“−−−−” is always displayed.
Not possible
Motion Registers
Not used.
“−−−−” is always displayed.
Not possible
Continued on next page.
