7.6 Debugging Ladder Programs
7.6.4 Searching and Replacing in Programs
7-60
7.6.4
Searching and Replacing in Programs
You can search for variables, instructions, and comments in a specified program. You can also
search for and replace registers and register comments.
The following section describes how to search for and replace text in programs.
Searching in Programs
1.
Bring the program to search to the front in the Ladder Editor, and then select
Edit
−
Find
from the menu bar.
The Search Dialog Box will be displayed.
2.
Click the
Variable,
Instruction,
or
Comment
Tab to set the search criteria.
Variable Tab Page: Allows you to search for variables and registers. You can also enter the variable
by copying it from the Variables Pane.
Instruction Tab Page: Enter the name of the instruction or the assigned instruction key in the
Instruction
Box.
The
Variable
Box is displayed when an instruction is entered in the
Instruc-
tion
Box. If the SEE instruction is entered in the
Instruction
Box,
Variable
changes to
Program Name
.
You can also enter the variable by copying it from the Variables Pane.
If the SERVOPACK is online, any changes in the data immediately affect the operation of the
SERVOPACK.
Information
