YASKAWA RM2-755-RDR, Instructions Manual

Page: 28 / 104

2-8
183523-1CD
183523-1CD
2 Installation
2.3 Positioner Installation
RM2-755-RDR Postioner
2.3.3 Transporting Method
The Positioner can be transported by either:
• overhead crane ( section 2.3.3.1 )
• two forklifts ( section 2.3.3.2 )
WARNING
• Sling applications and crane or forklift operations must be
performed by authorized personnel only.
Failure to observe this caution could result in serious injury or death.
• Never place any part of your body under a suspended load or move
a suspended load over any part of another person’s body.
A shifted or dropped load could result in serious injury or death.
CAUTION
• Make sure the lifting device is rated for handling the weight of the
equipment.
– Refer to
Table 4 - 1 “Positioner Technical Specifications” on page
4-1 and any additional documentation included.
If the handling equipment is not rated for handling the weight of the
equipment damage can occur.
• Avoid excessive vibration or shock during transportation.
The system consists of precision components.
Failure to observe this caution may adversely affect the performance.
• Do not ship or move Positioner in or around plant without shipping
brackets and alignment bar installed.
Failure to observe this caution may cause damage to the system.
28 of 104