No.
Parameter Name
Default Setting
L8-07
Output Phase Loss Protection Selection
1: Triggered when a single phase is lost
L8-38
Carrier Frequency Reduction
1: Enabled below 6 Hz
L8-41
High Current Alarm Selection
1: Enabled (alarm output)
<1>
Disable L8-05 for single-phase models.
Table 4.16 Preset 7: User Parameters (A2-01 to A2-16):
No.
Parameter Name
No.
Parameter Name
b1-01
Frequency Reference Selection 1
d1-03
Frequency Reference 3
C1-01 Acceleration Time 1
E2-01 Motor Rated Current
C1-02 Deceleration Time 1
H1-05 Multi-Function Digital Input Terminal
S5 Function
C6-02 Carrier Frequency Selection
H1-06 Multi-Function Digital Input Terminal
S6 Function
d1-01
Frequency Reference 1
H2-01 Terminals MA, MB, and MC Function
Selection
d1-02
Frequency Reference 2
L1-01 Motor Overload Protection Selection
u
Setting 8: Conveyor Application 2
This setting is available in drive software versions PRG: 1020 and later.
Table 4.17 Conveyor 2: Parameters and Settings
No.
Parameter Name
Default Setting
A1-02
Control Method Selection
0: V/f Control
C1-01
Acceleration Time 1
3.0 s
C1-02
Deceleration Time 1
3.0 s
C6-01
Drive Duty Selection
0: Heavy Duty
L3-04
Stall Prevention Selection during
Deceleration
0: Disabled
n3-13
Overexcitation Deceleration Gain
1.4
n3-21
High-Slip Suppression Current Level
150%
4.5 Application Selection
104
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
